The SG12 Floor grinder is the latest in concrete surface prep equipment.
General Equipment’s SG12/E Surface Grinder was designed for the professional contractor, as well as the home owner. With an electric motor that operates on a 15-ampere circuit, it also has a 3-inch diameter vacuum port to help keep airborne dust to a minimum. A folding handle makes it easier to transport in today’s smaller vehicles. The ergonomic design adjusts in height to reduce back strain, and the frame design makes it easier to traverse up and down stairwells. In the event the operator ever loses control, the exclusive QUIK-STOPTM deadman motor switch stops the motor. The unit also includes a 37-foot extension cord complete with GFI for additional safely.TYPE 11/2" hp (1.1 kW), totally enclosed, fan-cooled, capacitor-start,1725 RPM, single phase, 115 VAC, 60 hz, electric motor.FULL LOADED AMPERAGE (FLA) 13.7 amperes. Will normally operate on a clean, 15-ampere electric motor.RATINGELECTRIC MOTOR STARTING POWER 69 amperes. Size accordingly when operating from a portable, gasoline-powered generator.REQUIRED (SPR) RATING.(SPR)+(FLA) X5 FACTOR.FRAMESTRUCTURE Unitized, welded-steel plate.DRIVE SYSTEM Single B Series V-belt/pulley reduction.TRANSMISSION BEARINGS High-capacity, self-aligning ball bearing units with centralized lubrication system.MULTI-ACCESSORY DISC One each, aluminum, designed to direct mounting of all popular General, EDCO, Stow, Target, etc.multi-accessory attachments with the PLAS-T-LOKTM plastic wedge or standard wood wedge.DISC ROTATION SPEED 250 RPMDISC FLEXING SYSTEM Six Lord® type elastomeric bushings designed to flex at controlled rates and allow multi-accessorydisc to follow irregularities in surface profile. Bushings also help prevent damage to drivesystem in event the multi-accessory attachment comes in direct contact with above-surfaceobstruction. Bushings are easily replaced in the field with simple tools.OPERATOR HANDLE Adjustable height, ergonomically-positioned grips, foldable for transit and storage.FRAME HEIGHT ADJUSTMENT Three position to accommodate variances in multi-accessory attachments. Adjustment procedurerequires only simple hand tools.GENERALWIDTH 193/4" (502 mm)WIDTH (AT OPERATOR HANDLE) 281/2" (724 mm)HEIGHT (AT MAXIMUM HANDLE EXTENSION) 401/2" (1029 mm)LENGTH (HANDLE FOLDED) 28" (711 mm)LENGTH (OPERATING CONFIGURATION) 39" (991 mm)WEIGHT 242 lbs. (110 kg)